It is recommended to use the RR Industrial Low Foam Powder with the machine as it is a tried and tested product for cleaning and also does not create a lot of foam, which is desirable for carpet cleaning.
The instructions for use is to dilute 125g of powder (half a teacup) to 20 litres of water in a bucket. It is important to add the water first and then mix in the powder to prevent lumps which could block the filter of the machine.
The water must then be poured into the machine’s clean water tank that is located at the rear-end of the machine, it is identified by the large rectangular opening with a filter at the bottom.
After the water has been poured the operator may choose to use the Floor- or Handtool. The suction hose may be connected down the bottom of the front-end of the machine, and the other end may be connected to the brass-fitting on the tool to be used.
The suction hose cuff should be pushed over the grey opening at the top of the front of the machine, and the other end should be pushed over the back-opening of the tool to be used.
RR Industrial stocks parts and spares for this product and have the facilities to repair.
This product comes with a 6 month warranty, limited to the repair of the product and not the replacement thereof. Usage of the machine will also be taken into account.